In Depth: Param 1 & 2 Controls; Assigning A Parameter; Reverb Time Ranges And Display - Strymon BigSky User Manual

BigSky
- User Manual
In Depth: PARAM 1 & 2 controls
The PARAM 1 & PARAM 2 knobs allow you quick access to any desired menu parameter of the currently active reverb
machine. For example, DIFUSN on the Cloud machine can be assigned to one of the parameter knobs to allow for easier
control over the reverb diffusion.

ASSIGNING A PARAMETER

STEP 1: Navigate to the desired parameter to be assigned.
STEP 2: Press and hold the value encoder.
STEP 3: While holding the value encoder. Turn either the
PARAM 1 or PARAM 2 knob to assign a parameter.
STEP 4: Turn the newly assigned PARAM knob to adjust your
reverb machine parameter.

Reverb time ranges and Display

push the
TYPE encoder
The displayed Decay time is the Tr60 value, which is the time it takes for the reverberated signal to
decay to -60dB (1/1000th) of its initial value.
Hall, Plate, Swell, Bloom, Chorale, Shimmer
Spring
Cloud
Magneto
Nonlinear
Refl ections
Room
OR
to toggle the display between
BANK, NAME & TIME
500mS — +20.00S
800mS — 10.00S
1.00S — +50.00S
200mS — 1.50mS
50mS — 2.00S
133mS — 400mS
200mS — +20.00S
®
pg 4