Front Panel Controls - Strymon BigSky User Manual

BigSky
- User Manual

Front Panel Controls

VALUE: Turn for fi ne adjustment of
Decay time when time is displayed.
Scrolls through presets when bank
or name is displayed. Push to access
the PARAMETER menu, hold to
access the GLOBAL menu.
TYPE: Turn to select
desired reverb
machine. Push to
toggle the display
to show Decay time
or the current bank.
Hold to save current
preset.
TONE: Adjusts the
high end content of
the reverb. Lower
settings create
darker, warmer
reverberation, higher
settings are bright
and crisp. Set at 12:00
for a nicely balanced
top end.
A, B, & C LEDS:
Green if active.
Amber if the preset
has been edited. Off if
bypassed.
DECAY: Controls the
Decay time of the
reverberated signal.
The range can depend
on the selected
reverb machine.
A, B, & C FOOTSWITCHES: Press to engage or bypass preset of the current
bank. Hold for Infi nite Sustain or Freeze (selectable via PARAMETER menu).
Press A & B to select a lower bank. Press B & C to select a higher bank.
PRE-DELAY: Adjusts the time
between the dry signal and the
onset of the reverb, from 0 to 1.5
seconds. For the Nonlinear and
Magneto machines, this knob
controls the amount of Feedback.
®
MIX: Controls the
balance of your
analog dry signal and
your wet signal, from
100% dry at minimum
to 100% wet at
maximum. 50/50 mix
occurs when the Mix
knob is set to 3:00.
MOD: Adds
modulation to the
reverberated signal.
Lower settings
modulate the delay
lines lightly for a
subtle and natural
movement, higher
settings tastefully
add stronger
modulation.
PARAM 1 & 2:
Assignable to
parameters for
the current reverb
machine. To assign,
choose the desired
parameter, press and
hold value encoder
while turning a
PARAM knob.
pg 2