Table of Contents
Advertisement
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate, or
install the product. If you have any questions, please call our pump experts at
1-800-346-7611, 8 a.m. – 4:30 p.m. EST, Monday-Friday.
CHECKLIST BEFORE INSTALLATION:
1.
Inspect your pump. If the unit has been damaged in shipment, contact your retailer before installing.
2.
Carefully read all literature to familiarize yourself with details regarding installation and use. Retain
materials for future reference.
SPECIFICATIONS:
MODEL
WSSPC3(V)
WSSPC5 (V)
REMARKS: MODEL WITH "V" IS EQUIPPED WITH VERTICAL SWITCH
MATERIAL REQUIRED FOR PUMP INSTALLATION:
Materials Required:
1-1/2" ABS or PVC Pipe and adapter
Inline sump check valve with clamps to connect
discharge pipe to drain line exiting house
PVC Primer and Solvent to connect pipe to
adapter threaded into pump discharge
Thread tape
SAFETY INSTRUCTIONS:
This is a SAFETY ALERT SYMBOL.
When you see this symbol on the pump or in the manual, look for one of the following signal
words and be alert to the potential for personal injury or property damage.
1.
Do not pump flammable or explosive liquids such as oil, gasoline, kerosene, ethanol, etc. Do not use in
the presence of flammable or explosive vapors. Using this pump with or near flammable liquids can
cause explosion or fire, resulting in serious personal injury and/or property damage.
2.
Always disconnect the pump from its power source before installing, inspecting, maintaining, or repairing.
3.
Do not stand in water when the pump is connected.
4.
Do not touch the pump while it is operating, as the pump may be HOT and can cause serious burns.
5.
Do not disassemble the motor housing. The motor has NO repairable internal parts, and disassembling may
cause oil leakage or dangerous electrical wiring issues, and voids warranty.
WATER SOURCE LLC
MAX. FLOW
HP
(GPM)
1/3
48
1/2
66
Warns of hazards that WILL cause serious personal injury, death or major property
damage if ignored.
SEE BELOW FOR LIST OF DANGERS
GPM FLOW @ HEAD
10'
15'
20'
30
18
9
50
37
26
Tools Required:
2
MAX. HEAD
25'
30'
3
--
13
3
Screwdriver
Hacksaw to cut pipe
Knife to assist in pipe cutting
File to smooth pipe ends
Adjustable wrench to tighten fittings
WWW.WATERSOURCEUSA.COM
(Ft)
26
31
Advertisement
Table of Contents
