1. Manuals
  2. Brands
  3. water source Manuals
  4. Water Pump
  5. WSTPC50
  6. Operating instructions manual

water source WSTPC50 Operating Instructions Manual

1/2 hp general purpose water transfer pump
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
A
B
PACKAGE CONTENTS
Part
A
B
C
D
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-346-7611, 8 a.m. – 5 p.m., EST, Monday – Friday.
PERFORMANCE AT 10 FT. LIFT USING 3/4" HEAVY DUTY GARDEN HOSE
Discharge height above pumping level (head)
Gallons per minute
Max head at 0 ft. suction lift is 99 ft.
Description
Priming port plug
3/4" NPT x 3/4" garden hose fitting
Pump
Suction strainer
1/2 HP GENERAL PURPOSE
WATER TRANSFER PUMP
C
Quantity
1
2
1
1
5 ft.
10 ft.
15 ft.
17.3
16.5
15.5
MODEL: WSTPC50
B
20 ft.
25 ft.
30 ft.
14.6
13.4
12.2
D
35 ft.
11.2

Advertisement

Table of Contents
loading

Related Manuals for water source WSTPC50

Summary of Contents for water source WSTPC50

  • Page 1 1/2 HP GENERAL PURPOSE WATER TRANSFER PUMP MODEL: WSTPC50 PACKAGE CONTENTS Part Description Quantity Priming port plug 3/4” NPT x 3/4” garden hose fitting Pump Suction strainer Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-346-7611, 8 a.m. – 5 p.m., EST, Monday – Friday.

  • Page 2: Specifications

    SPECIFICATIONS Power supply required ....................115V, 60 HZ Water temperature range ..................Max. 113°F (45°C) Individual branch circuit required ................. 15 Amp minimum Operating water depth – beginning minimum................1/4 in. Inlet & discharge connection ..............3/4 in. garden hose thread Discharge hose diameter ..................5/8 in.
  • Page 3 CAUTION: • This transfer utility pump is designed for portable applications. It can drain or remove water from the following: fish tanks, water heaters, pits, sinks, window wells, basements, swimming pool covers, boats, low spots in yards, or other flooded areas. It can also be used for temporary pressure boosting for washing cars, washing boats, or cleaning off driveways.

  • Page 4: Installation Instructions - Transferring Water

    PREPARATION WARNING: Always use handle to lift pump. Never use power cord to lift pump. To avoid skin burns, unplug and allow time for the pump to cool after periods of extended use. Estimated Assembly Time: 5 minutes Materials Required for Assembly (not included): Thread tape, 3/4 in. heavy duty garden hose (for suction), 3/4 in.

  • Page 5: Installation Instructions - Pressure Boosting

    Use the strainer (D) when pumping from a creek, pond, or source where debris may be sucked into pump. The strainer should prevent debris from entering the inlet line (2). Note: To prevent re-priming during periods of frequent stopping and restarting of the pump (C), install a foot valve (sold separately) instead of the included suction...
  • Page 6 T o turn the pump off, unplug the power cord. OPERATING INSTRUCTIONS – PRESSURE BOOSTING Prime and run the pump: a. Turn the water source on. This will force the pump (C) to prime. b. Plug the power cord into a GFCI protected electrical outlet.

  • Page 7: Care And Maintenance

    CARE AND MAINTENANCE DANGER: Risk of electric shock. Always disconnect the electrical supply before attempting to install, service, or perform any maintenance. If the power source is out of sight, lock and tag in the open (off) position to prevent unexpected power application. Failure to do so could result in fatal electrical shock.

  • Page 8: Troubleshooting

    TROUBLESHOOTING Problem Possible Cause Corrective Action Pump does not 1. Blown fuse/tripped breaker 1. Replace fuse or reset breaker start or run 2. Low voltage 2. If using extension cord, use heavier gauge and shorter cord. 3. Worn motor brushes 3.

Table of Contents