Remote Control; Installation Of Batteries; Using The Remote Control - Tangent CDP-100 Instruction Manual

Installation of batteries

1 Remove the cover as illustrated.
2 Position two batteries of the type AAA/R03/UM4 in the
battery compartment. Make sure that the orientation of the
batteries is correct (see drawing at bottom).
- Do not mix new and old batteries and do not use different types of batteries.
- If the remote control is not used for prolonged periods, remove the batteries from the remote control to avoid corrosion.

Using the remote control

Direct the remote control at the sensor on the front panel of
the unit. When the remote control signal is received, the unit
reacts accordingly. The remote control works within a range of
6 metres.
- Sometimes the remote control does not work well in strong light. You may have to move the unit if it is a problem.
- Malfunction may occur if other remote controls are used near the unit.
- Do not place any objects on the remote control, as the batteries may become flat if a key is depressed constantly.
- Make sure that there are no obstacles between remote control and unit.
- Do not position the unit behind tinted glass as it may reduce the maximum range of the remote control.

REMOTE CONTROL

POWER
09
3 Replace the cover.
Infrared-
Sensor
1 2 3
4 5 6
7 8 9
FUNCTION
+10 0
MEMORY AUTOTUNE
PROGRAM RANDOM REPEAT
DAB/FM INFO SELECT
CD TUNER DVD
AUX1 PHONO AUX2
+
VOLUME