Caring For The Tablet; Cleaning The Tablet; Replacing The Pen Tip - GTCO CalComp DrawingBoard III User Manual

Restoring Save Default — GTCO DP5 High Resolution

Caring for the Tablet

Follow these precautions at all times to avoid damaging your DrawingBoard III:
Avoid discharging static electricity to the tablet.
Do not place heavy objects on the tablet surface.
Do not use sharp objects, like compasses or knives, on the tablet surface.
Do not use the tablet surface for any purpose other than drawing, tracing or digitizing.
Topics discussed in this section:

Cleaning the tablet

Replacing the pen tip

Replacing the pen batteries
Replacing the cursor batteries
Cleaning the tablet
To clean the tablet's surface, use a soft, non-abrasive cloth. Hardened dirt may be removed with a slightly
dampened cloth. Do not clean pencil lines with a soft cleanser or pencil eraser. This may create an undesirable
shiny spot on the tablet's surface that cannot be removed.
Warning: Do not use abrasive cleaners, acrylic or lacquer paint thinners, or cleansers with an acetone or solvent
base, such as MDC or EDC, on the tablet surface. They will damage the tablet case.
Replacing the pen tip
To replace the pen tip, grasp the tip and pull
straight out (see figure). Insert the new tip and
press until it clicks into place.
- 19 -