Cleaning The Battery - Active Care Medical Pilot 2310 Owner's Manual

Table of Contents

Advertisement

Questions? Call 866.621.4933 or visit www.activecaremed.com.
Caution
Please follow the rules below to avoid accidents while charging.
1. Please use the ActiveCare scooter's charger only and charge the
battery completely every time. The battery might be damaged if
you use a charger which is not compatible.
2. Never disassemble or modify the charger.
3. Charge in a well-ventilated space.
4. Do not charge in a space that is directly exposed to sunlight. Do
not charge in a space where it is humid or subject to rainfall or
morning dew.
5. Do not cover the scooter with any waterproof cloth or other
objects while charging.
6. Do not charge in temperatures lower than 14
122
F, the charger may not work properly and the battery may be
damaged.
Warning!
Do not open the battery seal cap at any time.

CLEANING THE BATTERY

If the battery is contaminated by dirty water, battery acid, dust or other garbage,
the battery will discharge quickly. Therefore, please follow the following steps to
clean the battery.
1.
Turn the scooter power switch to OFF.
2.
Remove the seat.
3.
Remove the shroud and unplug the terminal of the taillight and signal lights.
4.
Use a clean cloth to wipe off the soiled area.
5.
Take out the battery.
6.
Clean the battery with a clean cloth. If the terminal is covered by white
powder, please clean it by using warm water.
Suggestion
If necessary, ask for help from your ActiveCare dealer for cleansing
and replacing of the battery.
Pilot Owner's Manual
F or higher than
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pilot 2410

Table of Contents