Number Of Led's; Delay; Burst; Camera Sensitivity - Primos Truth Cam46 63020 Instruction Manual

- Choose
Number of LED's (NUM_LED)
to use all LED's for longer night vision or
less LED's to save battery power when
the longer distance is not needed.
Example: 46 LED's will be used at night
More LED's
Advantage
• Longer Night Illumination
• Brighter and Clearer Pictures
Drawback
• More Power Consumption
(shorter battery life)
• Greater Chance of Deer
Recognizing "Red LED Glow"
Primos recommends using versatility of selectable LED Number to your advantage
®
depending on the situation. If you know where the game is going to be and can setup
the camera closer, it probably it probably makes sense to enjoy the advantages of
Less LED'S. However, when you are uncertain or need the extended night range, you
can use all of the high-output LED's!
- The pre-set amount of time you

DELAY

desire between photo/video recordings.
Example: Camera will wait 1 minute between
photo/video recordings with motion
Less LED's
Advantage
• Less Power Cosumption
(longer battery life)
• Less Chance of Deer
Recognizing "Red LED Glow"
Drawback
• Shorter Night Illumination
• Pictures not as Bright
9
- Number of pictures taken each

Burst

triggering event (
only relevant if in camera mode
Example: Camera will take 3 rapid photos in a row
- Motion
Camera Sensitivity (Sensing)
Detector Sensitivity. Use 'Normal' as default.
You can adjust the sensitivity of the Passive Infrared
(PIR) Motion Sensor on your camera. The PIR
sensor detects motion AND the difference between
body heat and the outdoor temperature. Therefore,
adjusting the sensor affects the DISTANCE and
HEAT SENSITIVITY of the detection.
TIP: It may not always be best to use 'high sensitivity' to see how far away you can capture
images of game. If the game is closer when the camera is triggered, you will end up with better
pictures/videos. You can learn what is best for your situation; here is a summary of the settings:
High Sensitivity
• Use when trying to detect game at further distances (
• May use in warmer months or high heat climates so it is easier for sensor to detect difference
between body heat and outdoor temperature.
• May use when trying to capture photos of smaller game.
Normal Sensitivity
• Optimized to work best in most conditions and for normal use
Low Sensitivity
• May use if you have the camera setup in a location that is getting a lot of 'empty' photos
(false triggers)
• May use if you are getting a lot of hard-to-see long range photos of game (
) and would like game to get closer before camera captures images.
temperatures or with larger game
).
in fields or open areas with long-range visibility
more likely in colder
10
)