Table of Contents
Advertisement
Clearing SD Memory Card
Formatting the SD Card erases all images and data.
To clear photos using TRUTH
Cam, see 'FORMAT' under
®
'CAMERA MENU OPTIONS'.
(Page 11)
Power Saving State
When the TRUTH
Camera is powered on, the LCD menu screen will
®
automatically turn on. If menu is left inactive (no settings changed or button
pushed) for 30 seconds, the camera will automatically switch to "RUN/ON"
mode and LCD screen will enter a power saving state.
(NOTE: The camera is active and ready to take photos/video when LCD is in a power saving
sleep state.)
The LCD screen can be awakened by pressing the
(NOTE: The LCD menu will not wake up from Power Saving State while the Green Status Light
is on. Wait until after Green Light turns off to WAKE up LCD screen.)
Powering Unit OFF
***LCD MENU MUST BE ON TO TURN OFF CAMERA
1. Wake up LCD screen from power saving mode by hitting
button (screen will not come on when Green Status Light is illuminated)
2. After the LCD menu screen is on, press and hold the ON/OFF button for
2 seconds. Screen should say PWR OFF before turning off.
Step 1 (Wake Up LCD Screen)
Image Stamp
/WAKE button.
RUN
/WAKE
RUN
Step 2 (Powering Unit Off)
13
ReCOMMeNDeD ACCeSSORIeS
Primos
TRUTH
Cam Accessories
®
®
1. TRUTH
Cam Pivoting Mount
®
2. Camera Glove Protective Case
1.
• Pivoting Camera Mount
• Fits on all TRUTH
CAM Models
®
• Allows You to Mount Camera
on ANY TREE and at virtually
ANY ANGLE
Other Accessories
1. Padlock for door latch to prevent tampering camera settings or memory
2. Locking Security Cable to run through case and around tree. Master Lock
Python
Adjustable Locking Cable is convenient and highly recommended.
™
3. 6V DC External Battery for those needing extended battery life for remote
or extremely active locations (plug into bottom of camera)
2.
Camera Glove Protective Case
• Stretch Fit Neoprene
• Works with all
TRUTH
CAM Models
®
• Accessory Pouch and
SD Card Pocket
14
®
Hide quick links:
Advertisement
Table of Contents
