Precautions To The Ac Adapter And Electrical Power - LG 32SE3B Owner's Manual

Digital signage (monitor signage)
Hide thumbs Also See for 32SE3B:
Table of Contents

Advertisement

4
SAFETY PRECAUTIONS
Precautions to the AC adapter and
electrical power
WARNING
If water or any foreign substance goes inside the product (TV,
monitor, power cord, or AC adapter), disconnect the power cord
immediately and contact the service center.
Otherwise, this may cause a fire or electric shock due to damage to
the product.
Do not touch the power plug or AC adapter with wet hands. If the
pins of the plug are wet or dusty, wipe and dry them before use.
Otherwise, this may cause a fire or electric shock.
Make sure to completely insert the power cord into the AC adapter.
If loosely connected, the poor connection may cause a fire or electric
shock.
Be sure to use power cords and AC adapters provided or approved
by LG Electronics, Inc.
The use of non-approved products may cause a fire or electric shock.
When unplugging the power cord, always pull it by the plug. Do
not bend the power cord with excessive force.
The power line can be damaged, which may cause electric shock
or fire.
Be careful not to step or place heavy objects (electronic appliances,
clothing, etc.) on the power cord or AC adapter. Be careful not to
damage the power cord or AC adapter with sharp objects.
Damaged power cords may cause a fire or electric shock.
Never disassemble, repair or modify the power cord or AC adapter.
This may cause a fire or electric shock.
Make sure to connect the power cable to the grounded current.
You may be electrocuted or injured.
Use the rated voltage only.
The product can be damaged, or you may be electrocuted.
In the presence of thunder and lightning, never touch the power
cord and signal cable because it can be very dangerous.
It can cause electric shock.
Do not connect several extension cords, electrical appliances
or electrical heaters to a single outlet. Use a power bar with a
grounding terminal designed for exclusive use with the computer.
A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if
the cord pin is wet or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess moisture.
If you don't intend to use the product for a long time, unplug the
power cable from the product.
Covering dust can cause a fire, or insulation deterioration can cause
electric leakage, electric shock or fire.
Fix the power cable completely.
If the power cable is not fixed completely, a fire can break out.
Do not insert a conductor (like a metal chopstick) into one end
of the power cable while the other end is connected to the input
terminal on the wall. Additionally, do not touch the power cable
right after plugging into the wall input terminal.
You may be electrocuted.
The appliance coupler is used as the disconnect device.
Please make sure the device is installed near the wall outlet to
which it is connected and that the outlet is easily accessible.
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if the unit is turned
off.
CAUTION
Be sure to keep the outlet, AC adapter, and pins of the power plug
clean from dust and etc.
This may cause a fire.
Do not unplug the power cord while the product is in use.
Electrical shock can damage the product.
Use only the power cord supplied with the unit. If you use another
power cord, make sure that it is certified by the applicable national
standards when not provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or the nearest
authorized repair service provider for a replacement.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents