Power Source
Battery Installation
1. Press and open the battery cover.
2. Put six "D" (R20) batteries (not supplied) into
the compartment making sure the 2 and 3
should be correctly positioned.
3. Close the battery cover.
CP3520-FU_ADEULLK_ENG.indd 9
AC Power Cord Connection
1. Connect one end of the AC power cord
(included) to the AC IN socket.
2. Plug the other end into the wall outlet.
,
Note
y Unplug the AC power cord from the wall
outlet if you do not to use for an extended
period of time.
y To avoid damage from possible battery
leakage, remove the batteries if you do not
plan to use the unit for an extended period
of time.
y When the batteries are weak, replace all the
batteries with new ones.
y While the AC power cord connect to the
wall outlet, the batteries are not worn out.
y Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such
as sunshine, fire or the like.
Connecting
9
2
2013-03-27
5:18:26