Powering The Speakers; Controlling The Volume - Victor MR500 User Manual

2: Playing music from an Apple® device
To play music from your Apple® device, plug in either the USB type-B
cable⑬ or the DC 5V Adapter⑫ to power the Monitor Riser. Then place
the Apple® device on the docking station⑥ (Note: When powered by the
DC 5V Power Adapter your Apple® device will not be able to
communicate with your computer. Use the supplied USB type-B cable to
connect to the computer in order to manage your device with programs
such as iTunes®).
3: Playing music from a USB device
To play music from a USB device such as a flash drive, plug the USB device
into one of the USB ports on the front or rear of the All-In-One
④
Monitor Riser. Then follow the directions of how to supply power to the
All-In-One Monitor Riser in section 1 of Using the speakers. You can now
manage the music from your connected computer.
4: Playing music from other devices (phones, MP3 players, etc.)
You can also play music from a number of other devices. Plug in the USB
type-B cable⑬ into the USB type-B input⑪ or the DC 5V power cable⑮
into the DC 5V input adapter⑫. Using the supplied Auxiliary cable⑭,
plug one end into the All-In-One Monitor Riser⑩ and the other into your
device. You may control the playback of music on whatever device you
are using.

Powering the speakers

Once the All-In-One Monitor Riser is powered by USB or 5V DC Adapter,
you may enjoy music from your speakers. To do so, turn the VOLUME
knob clockwise. Upon turning, a blue LED light will illuminate signaling
that the speakers have power.

Controlling the volume

To control the volume, rotate the Volume knob⑦ clockwise and
counterclockwise. Turning the Volume knob⑦ clockwise (right) will
6