Connecting The Power Supply; Speakers; Using The Speakers - Victor MR500 User Manual

Connecting the power supply

There are 2 ways to connect power to your All-In-One Monitor Riser:
1: USB Type-B Cable
Plug the square end of the supplied 6 foot USB Type-B cable⑬ into the
rear USB type-B input⑪ of the All-In-One Monitor Riser. Plug the flatter
end of the USB cable into an open port on your computer/laptop. You
now have power to the All-In-One Monitor Riser. You also have the ability
to communicate to your computer/laptop via flash drives, SD Cards,
Apple® products, etc.
2: 5V DC Power Adapter
Plug the DC 5V power cable⑮ into the rear DC 5V input adapter⑫ of
the All-In-One Monitor Riser. Plug the larger end of the adapter into a
wall outlet.

Speakers

Using the speakers

The All-In-One Monitor Riser has two high quality speakers③ to play
music/sounds from your computer, Apple® device, phone, MP3 player or
other device.
1: Playing music/sounds from computer
In order to play music/sounds from your computer you must have the All-
In-One Monitor Riser connected with the USB type-B cable⑬. You must
also have the 6 foot Auxiliary cable⑭ attached. To do this, plug one end
of the cable into either the front or rear Auxiliary port⑩ on the All-In-
One Monitor Riser and the other end into the "AUX" port on your
computer. If your computer does not have a "AUX" port, use the
"headphone" port instead (Note: If you would like to play music/sounds
from your computer through the All-In-One Monitor Riser for an
extended period of time, we recommend using the rear Auxiliary port.
This will reduce cord clutter).
5