Advertisement
Wash Timer
Water Inlet
Water Inlet
select
Hanging Hook
Wash Lid
Haier Warranty Terms & Conditions
Spin Timer
Drain Selector
Wash/Soak Timer
Wash selector
(to set to below 1
After washing, the buzzer
(To set to below 2 minute,
(Gentle wash speed,
minute, first set to 2
will ring. Set the Drain
first set to 6 minute then
Normal wash speed
minute then turn it back.
Selector at DRAIN.
turn it back. It can increase
Strong wash speed)
It can increase the
the service life of the timer)
service life of the timer)
WASH-RINSE
STRONG
DRAIN
SELECTOR
Insert water inlet pipe
towards wash side water
inlet of control panel.
STRONG
3
4
WASH-RINSE
DRAIN
Figure 5
DRAIN
Figure 5
SELECTOR
Control
Panel
Spin
Timer
Drain
Hose
Spin
Lid
Filter
Spin-dry
Inner Lid
Water-fall Outlet
Spin-dry
Pulsator
Basket
Power
Cord
Cabined
Base
The new hose-sets supplied with the appliance are
to be used and that old hose-sets should not be reused.
Haier Manual XPB76-113S Back
It is suggested to use foamless washing powder.
Please don't use the washer in the environment below 0°C. If the washer is
below 0°C, the washer's water inlet/draining system will be frozen and will
result in damaged of whole machine. If the washer has below 0°C, please
be sure to ensure that washer is placed under room temperatures for
2-4 hours and then use.
Insert water inlet pipe towards spin side
water inlet of control panel. Fill water for
about 1 minute. If the water quantity filled
is too large, the water may flow out from
the wash tub side. Please twist the water
tab to limit the water filling.
H
High
M
Medium
L
Low
Advertisement
