Your tool has been designed to operate over a
long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
Warning! Before performing any maintenance,
switch off and unplug the tool.
Regularly clean the ventilation slots in your
tool using a soft brush or dry cloth.
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
Mains Plug Replacement
If a new mains plug needs to be ﬁtted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal of
the new plug.
Connect the blue lead to the neutral terminal.
If the product is class l (earthed), connect the
green / yellow lead to the earth terminal.
Warning! If your product is class ll double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth terminal.
Follow the ﬁtting instructions supplied with good
Any replacement fuse must be of the same
rating as the original fuse supplied with the
of router bit
Max. depth of cut
11,000 - 28,000
1/2" (12.7)/ 1/4" (6.35)/
8 mm / 6 mm