Download Print this page

Advertisement

Quick Links

11
3
6
10
9
8
7
5
4
1
2
3
UK
Ireland
Australia
New Zealand
1

Advertisement

loading

Summary of Contents for Black & Decker XTW1500E

  • Page 1 Ireland Australia New Zealand...
  • Page 2 3 mm...
  • Page 6: Intended Use

    Intended use b. Use safety equipment. Always wear eye protection. Your Black & Decker router has been designed for routing Safety equipment such as dust mask, non-skid safety wood and wood products. This tool is intended for consumer shoes, hard hat, or hearing protection used for use only.
  • Page 7 Features g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the 1. On/off switch manner intended for the particular type of power 2. Lock-off button tool, taking into account the working conditions 3.
  • Page 8 Fitting the distance piece (fig. E) Tighten the locking screw (30). Fit the distance piece (14) to the base of the router using Fine adjust using the adjusting knob (34). One full turn the screws provided. corresponds to approx. 1 mm. Pull the plunge lock lever (5) up and return the router to its Fitting the centring pin (fig.
  • Page 9 Using the template guide (fig. D) Allow the tool to build up speed before plunging down The template guide can be used to make a cutout shape from into the workpiece. When the depth stop bar has been a template, for instance a letter. contacted, operate the plunge lock lever (5).
  • Page 10: Maintenance

    Technical data Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory XTW1500E operation depends upon proper tool care and regular cleaning. Input voltage Warning! Before performing any maintenance, switch off and...
  • Page 11 If a Black & Decker XT product (excluding accessories, attachments, batteries, chargers and chucks) becomes defective due to faulty materials, workmanship or lack of conformity within 3 years from the date of purchase, Black & Decker guarantees to replace all defective parts, repair products subject to fair wear and tear or replace such products, provided that the product is registered on the Black &...
  • Page 16 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...