Mounting the Microphone
The microphone supplied with the AG-DVC200 or that of the AJ-MC700P microphone kit (optional accessory) can be
attached to the unit.
1.
Open the microphone holder.
Slide stopper screw
2.
Mount the microphone.
Specifications
Power supply:
DC 9 V, 12 V (supplied by camera)
Power consumption: 2 W
Picture tube:
1.5-inch high-resolution monochrome picture tube
Horizontal resolution:
600 lines (center, typical, 4 : 3 mode)
Image system:
525 lines, 59.94 Hz
External adjustment controls:
Controls (BRIGHT, CONTRAST, PEAKING)
Switches (TALLY ON/OFF, ZEBRA ON/OFF)
3.
Plug the microphone connector cable into the MIC IN
jack.
Viewfinder
Microphone holder
<Note>
O When attaching the microphone to the unit, ensure that
the screw is tightened securely.
OSecurely tighten the stopper screw attached to the
crosswise adjustment section of the viewfinder. The
viewfinder may fall off if the stopper screw becomes
loose.
Allowable temperature range:
32°F to 104°F (0°C to 40°C)
Allowable humidity range:
85% or less (no condensation)
External dimensions (WaHaD):
9
7
/
8
Weight:
1.5158 lb (689 g)
5
MIC IN jack
indicates safety information.
˝a3
1
/
˝a7
1
/
˝ (250.5a81a190 mm)
4
2