Installation; Installation Precautions - LG HECTO Owner's Manual

Installation

Installation Precautions

• Place the product in a well-ventilated
environment.
- To prevent the internal heat from
building up, install the Laser Display
in a well-ventilated place.
Do not place anything near the
Laser Display. That may block
its air vents. If the air vents are
blocked, the internal temperature
will increase.
- Do not place the Laser Display on
a carpet or rug. If a product has its
inlet vent on its bottom, do not block
the vent and use the product on a
leveled solid surface.
- Be sure to prevent foreign objects,
such as scraps of paper, from
entering the inlet vent.
- Leave enough distance (30 cm or
more) around the vent of the Laser
Display.
PREPARATION
• Do not place the product in a hot or
humid environment.
- Do not place the product in a hot,
cold, or humid environment.
(See the details about the operating
temperature and humidity.)
• Do not place the product in a dusty
place.
- This may cause fire.
• Never open any cover on the product.
There is a high risk of electric shock.
• The Laser Display is manufactured
using high-precision technology. You
may, however, see tiny black dots
and/or bright spots that continuously
appear on the screen. This is a
normal result of the manufacturing
process and does not indicate a
malfunction.
• The remote control may not work
in an environment where a lamp
equipped with electronic ballasts or
a three-wavelength fluorescent lamp
is installed. Replace the lamp with an
international standard lamp for the
remote control to work normally.
• Do not open or press the electric door
or by force.
- This may cause product
malfunction.
21