Technical Specifications; Operating Instructions - Elumen8 Alu HEX Par 64 User Manual

02 01
DMX channel mode:
Operating in DMX control mode gives the user the greatest flexibility when it comes to customising
or creating a show. In this mode you will be able to control each individual trait of the fixture and each
fixture independently.
To access the DMX channel mode, press the "MODE" button on the rear of the unit to show "CH:01"
on the LED display, then use the "UP" and "DOWN" buttons to set the desired DMX address of either
1, 3, 4, 5, 6, 7 or 9 DMX channel modes.
To set the units address, press the "MODE" button on the rear of the unit to show "ADDR:001" on the
LED display, then use the "UP" and "DOWN" buttons to set the desired address from "001" - "512".
Press the "ENTER" button to confirm any settings.
To exit out of any of the above options, press the "MODE" button.
www.prolight.co.uk
03 09 07 08
PUSH
DMX DMX
IN OUT
ALU HEX
PAR 64
POWER IN
FUSE
www.prolight.co.uk
2A/250V
MODE ENTER UP DOWN
11 06 06

Technical specifications

10
POWER OUT
SAFETY
EYE
04
Alu HEX Par 64 User Manual
01 - Bracket
02 - Bracket tightening knobs
03 - Earth point
04 - Safety eye
05 - LED display
06 - Function buttons
07 - DMX input socket
08 - DMX output socket
09 - PowerCON in socket
10 - PowerCON out socket
11 - Fuse 2A 240V
In the box: 1 x fixture,
1 x 13A powerCON
mains cable &
1 x user manual

Operating instructions

4