Table of Contents
Advertisement
up.
•
Press the on/off button once to turn on the fireplace with fire
effect. A red indicator light will illuminate to indicate that the
fireplace is on.
•
Press the low button once, to lower the heat; press twice to
switch off the heat completely.
•
Press the high button once to increase the heat; press twice
to switch off the heat completely.
•
Press the dimmer button to operate the dimmer mode.
Repeated pressing will automatically raise and lower the
brightness of the fire effect.
Remote Operation
•
The standby switch must first be
switched on. The fireplace will beep
to indicate that it is powered up.
•
It takes a little time for the receiver
to respond to the transmitter. Do not
press the buttons more than once
within two seconds, for the fireplace
to operate normally.
•
Press the on/off button once to turn
on the fireplace with fire effect.
•
Press the low button once, to lower
the heat; press twice to switch off the heat completely.
•
Press the high button once, to increase the heat; press twice
to switch off the heat completely.
•
Press the dimmer+ button to operate the dimmer mode to
raise the brightness of the fire effect.
•
Press the dimmer- button to operate the dimmer mode to
lower the brightness of the fire effect..
7
Advertisement
Table of Contents
