Table of Contents
Advertisement
Installation
This section provides step-by-step instructions for installation of
your fireplace.
WARNING
The outlet must be 15A/125V.
CAUTION
Do not remove the four rubber feet at the bottom of the
fireplace insert or install the fireplace insert directly on soft
surfaces, which may restrict air circulation. Otherwise, it
may cause a risk of fire or damage.
1. Select a suitable location, which is not susceptible to moisture,
safe, dust free, away from high traffic and away from things
may catch fire or block openings such as drapes, furniture, etc.
NOTE
This fireplace is built-in appliance and for household
use only.
It is a good idea to place your fireplace near an
existing outlet, for ease of electrical hook up.
2. Place the fireplace in the desired location to see how it will
look in the room.
3. Place the mantel in the desired location or build a wall
construction in the desired location.
4. The size of space for inserting should be 610mm (Wide) X
550mm
CAUTION
(High)
X230mm
5
(Deep)
Advertisement
Table of Contents
