Function Buttons - Viking 3 Series Use And Care Manual

Operating the Dishwasher

Function Buttons

The combination of high temperatures and dishwasher detergent may cause damage to some items if they are washed in the
dishwasher. Remember, if there is any doubt about any aspect concerning items to be washed in the dishwasher, follow the
instructions from the manufacturer of the items, or wash the items by hand.
On/Off Button
on
Turn the dishwasher on with the On/Off button. When turning on, the icon on the display of the last used program will
off
light up.
P P
Program Selection Button
Use the Program Selection button to select the desired program. The icon of the corresponding program will light up.
Refer to "Table of Program Data and average Consumption Values" to select a program suitable for your dishes. select
the desired program with Program Selection button.
Function
F
Use the function button to select Half Load, Tablet Detergent, and Sanitize Functions.
Half Load Function
If you want to run your machine without loading it completely, place your dishes into the machine as you desire. Press
On/Off button to turn on your machine. Press the Half Load/Tablet Function button after selecting the desired program
until Half Load Indicator lights up, then press Start/Pause/Cancel button and close the door of your machine. With the
Half Load option you can use every part of your lower and upper baskets and save water and energy.
Tablet Detergent Function
Depending on the hardness level of the tap water, the Tablet Detergent function allows obtaining a better drying
performance from the multipurpose detergents such as 2in1, 3in1, 4in1, 5in1, etc., called as all-in one detergents. Tablet
Detergent Indicator lights when the Tablet Detergent function is selected.
Salt and Rinse agent indicators turn off when this function is activated.
Turn on your machine by pressing the On/Off button to use the Tablet Detergent function. Press the Function button
after selecting the desired program until the Tablet Detergent Indicator lights up. Press Start/Pause/Cancel button and
close the door of your machine.
Sanitize Function
Sanitize function raises the water temperature in the fi nal rinse to meet the requirements of NSF/ANSI STANDARD 184
for Residential Dishwashers. Certifi ed residential dishwashers are not intended for licensed food establishments.
Available only with Regular Wash, Pots & Pans, and Pots & Pans Plus programs.
Turn on your machine by pressing the On/Off button to use the Sanitize function. Press the Function button after
selecting the desired program until Sanitization indicator lights up. Press Start/Pause/Cancel button and close the door
of your machine.
By using the Function button, Half Load, Tablet Detergent and Sanitize functions can be selected individually.
Selected function will remain active in the next washing program. If you want to use
these functions in the new program you have selected, press the Function button until
the indicator of the relevant function turns off .
WARNING
14