Table of Contents
Advertisement
4-15 Replacement of Body Latch
1. Remove the wiring.
2. Remove the operating panel as under (2).
3. Remove the latch fixing screws(two).
4. Remove the latch.
Latch adjustment method
1) Pressing the latch fixing screw 1 towards the
front panel, make the A surface of lever fully
press the button of switch 1 and then fasten up
the latch fixing screws.
Note) A gap between the door and front panel
may be formed if the pressing is too
hard.
2) Fasten the latch fixing screws in this state.
FRONT
-PANEL
4-6
OPEN
Latch fixing screw 1
Latch fixing screw 2
Latch fixing screws(two)
CLOSE
Disassembly and Reassembly
Latch
LEVER-A
Switch 1
Monitor
switch
Switch 2
Samsung Electronics
Advertisement
Table of Contents
