Samsung CO88R Service Manual page 12

4-13 Replacement of Lower Heater and Weight Sensor assembly
1. Remove the wiring(High voltage transformer
primary, fan motor, low voltage transformer,
Power cord input).
2. Remove the back-panel.(seven screws)
3. Remove the decoration-foot. (two screws)
4. Remove four BKT-holder slider(R,L)
attachment screws and eight base-plate
attachment screws.
5. Remove the nuts of noise filter.
6. Remove the base-plate.
7. Remove the wiring.
8. Remove the weight sensor assembly.
9. Remover the BKT-weight-sensor B.
10. Remove the lower heater attachment screws.
11. Remove the lower heater.
4-14 Replacement of Fan Motor and Lower Voltage Transformer
1. Remove the wiring(fan motor, low tension
transformer primary and secondary).
2. Remove the screws(two for fan motor and two
for low voltage transformer).
3. Remove the fan heater.
4. Remove the low voltage transformer.
Samsung Electronics
Base-plate fixing screws
BKT-Holder Slider
R L fixing screws
Base-plate fixing screws
Lower heater
Lower heater
fixing screws(two)
Weight sensor assembly
Lower voltage transformer
fixing screws(two).
Fan motor fixing screws(two).
Disassembly and Reassembly
Decoration
foot
Noise filter
fixing nut
Holder
Lower voltage transformer
Fan motor
4-5