Armrest Angle Adjustment - Pride Jazzy Select series Owner's Manual

Hide thumbs Also See for Jazzy Select series:

Owner's manual (52 pages)

Owner's manual (44 pages)

Table Of Contents

Table of Contents

V . C O M F O R T A D J U S T M E N T S

Manual Recline Seatback Adjustment

If your power chair is equipped with a manual recline

seatback, you can adjust the seatback angle with the

seatback release lever. The lever is located on the right

side of the seat base. See figure 21.

To adjust the recline angle:

1. Pull up on the seatback release lever.

2. Lean forward or rearward to the desired position.

3. Release the lever.

Seatback Angle Adjustment

If your power chair is equipped with a limited-recline

seatback, you can adjust it to four (4) different angles:

90°, 102°, 105° or 107°.

To adjust the seatback angle:

1. Remove the adjustment screws from each seat

hinge. See figure 21.

2. Set the seatback at the desired angle.

3. Reinstall the adjustment screws to each seat hinge

and tighten.

Armrest Width Adjustment

You can change each armrest's width independently of

the other.

NOTE: Changing the armrest width may increase the

overall width of your power chair.

To change the armrest width:

1. Locate the two armrest knobs on each side of the

armrest receiver bracket. See figure 21.

2. Loosen the knobs.

3. Slide the armrests in or out to the desired width.

4. Tighten the knobs.