Adaptive Headlamps - Lincoln 2015 MKZ Owner's Manual

The high beams will switch off if:
• the system detects the headlamps of an
approaching vehicle or the tail lamps of
a preceding vehicle.
• vehicle speed falls below 16 mph
(25 km/h)
• the ambient light level is high enough
that high beams are not required
• the system detects severe rain, snow or
fog
• the camera is blocked
Activating the System
Switch on the system using the information
display and autolamps. See Information
Displays (page 107). See Autolamps (page
85).
MKZ (), enUSA
Lighting
E142451
Switch the lighting control to the autolamps
position.
Manually Overriding the System
E169254
I n f o r ma t i o n P r o v i d e d b y :
89
When the automatic control has activated
the high beams, pushing or pulling the stalk
will provide a temporary override to low
beam.
Use the information display menu to
permanently deactivate the system, or turn
the lighting control switch from autolamps to
headlamps.

ADAPTIVE HEADLAMPS

The headlamp beams move in the same
direction as the steering wheel. This provides
more visibility when driving around curves.
A. Without adaptive headlamps
B. With adaptive headlamps