4. Plug the power cable into the 12-volt
power point in the vehicle.
MKZ (), enUSA
Wheels and Tires
5. Remove the warning sticker found on the
casing/housing and place it on the top of
the instrument panel or the center of the
dash.
6. Start the vehicle leave the engine running
so the compressor does not drain the
vehicle's battery.
I n f o r ma t i o n P r o v i d e d b y :
320
E175981
7. Turn dial (A) clockwise to the sealant
position. Turn the kit on by pressing the
on/off button (B).