Rangemaster SxS 15 User Manual page 9

Preventing Ice from Being Made
If you do not require any ice over a prolonged period of time
(i.e. during winter) you can switch off the valve between the
water supply and the appliance. It is recommended that you
clean the icebox, dry it carefully and replace it back into the
appliance – this will prevent any odours being produced.
Installing and Removing the Ice Cube Storage
Drawer
To remove the icebox, lift the middle of the drawer and then
pull it out, releasing the unit (Fig.2.6).
Note: Water moisture may have condensed and frozen the
icebox in place.
If the icebox does not fit easily, remove it and turn the cam
mechanism 90° clockwise (Fig.2.7). Reinstall the icebox,
making sure that the catch on the tray fits into the shelf slot.
By removing the ice box, additional space for food
n n
storage is provided. Please install the spare storage
shelf above the ice dispenser on the freezer door
(Fig.2.8).
If the Ice Maker does not Work Properly
The volume of the icebox equals the quantity of ice cubes,
which the appliance can make in one day. Occasionally small
number of ice cubes may remain inside the box. If the ice
gets stuck, this will result in abnormal operation of the ice
cube maker. To avoid this problem, remove the icebox and
rearrange the ice cubes, and remove the ice cubes which
cannot be separated.
Always keep the ice cube outlet clean and clear of
n n
obstructions.
Icebox
7
Fig.2.6
Icebox
Fig.2.7
Cam
mechanism
Fig.2.8
Additional
storage shelf