Port Management; Port Management > Port Settings - Linksys SRW224G4P User Manual

Chapter 

Port Management

Port functionality can be controlled using the Port
Management settings . Speeds, duplex, grouping, and
Power over Ethernet settings, and more can be defined .
Port Management > Port Settings
You can manually configure the speed, duplex mode, and
flow control used on specific ports, or use to detect the
connection settings used by the attached device . Use the
full-duplex mode on ports whenever possible to double
the throughput of switch connections . Flow control should
also be enabled to control network traffic during periods
of congestion and prevent the loss of packets when port
buffer thresholds are exceeded . The Switch supports flow
control based on the IEEE 802 .3x standard .
This screen displays the current connection status,
including the description, administrative status, link
status, speed, duplex mode, MDI/MDIX, flow control, type,
and LAG .
Port Management > Port Settings
Port
Displays the port number .
Descrpton
Displays a description for the port, if one has
been defined .
Admnstratve Status Displays the administrative status
of the appropriate port .
Lnk Status Displays the link status of the port .
Speed Displays the current speed of the port .
Duplex Displays the current duplex mode of the port .
MDI/MDIX Indicates if the port is being utilized as an MDI
or MDIX port .
24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
Configuring the Switch
Flow Control Indicates the type of flow control currently
in use (IEEE 802 .3x, Back-Pressure, or None) .
Type Indicates the port type (100Base-TX, 1000Base-T, or
SFP) .
LAG Indicates whether the port is a LAG member .
Each port has a Detal button that opens a screen for
editing port settings . Click the Detal button to open the
Port Setting detail screen for the desired port .
Edit Port Settings
You can use the Port Setting detail screen to enable/disable
an interface, set and interface capability advertisements,
or manually force the speed, duplex mode, and flow
control .
Port Management > Edit Port Settings
This screen allows you to edit the following information
for each port on the Switch .
Port Use the port drop-down menu to select a port .
Port Configuration
Descrpton
Use this field to describe the interface .
(Range: 1-64 characters)
Speed Duplex Used to manually set the port speed and
duplex mode when autonegotiation is disabled .
Autonegotaton Enables or disables autonegotiation .
When autonegotiation is enabled, you need to specify
the capabilities to be advertised . When autonegotiation is
disabled, you can force the settings for speed, mode, and
flow control . Autonegotiation is enabled by default .
1