Table of Contents
Advertisement
Hide the antenna wire inside the vehicle cabin by routing the cable under the carpet
and behind plastic trim, toward the headunit location. Coil and secure any excess
cable in a hidden location, such as under the carpet, using wire ties (not included).
•
CAUTION! Do not kink or sharply fold the antenna cable.
Route cable out of window
Feed cable under
moulding and into weather-
~ rubber m~ulding
stripping around trunk Opening~~~ ~
around window.
/1 {,
1£1
I
~
.......
~I
I
1;3
~W
~
I
~0~
Bring cable out from trim and
-------;, ' ... , '
~
I
route under carpet and behind
~
the dash to the headunit. Coil
Route ca.ble alon9 trunk
and secure excess cable under
wall and Into cabin.
carpet or behind dash.
Route cable from trunk under interior trim,
into cabin and towards front of vehicle.
Route the Antenna Cable
If you are installing the antenna at the edge of the roof or hood, install the
Antenna Cable Routing Adapter to direct the
~
cable downward. Place the antenna cable
-----
into the groove of the adapter and slide the
adapter down the cable until the adapter is
flush with the bottom of the antenna.
Use care when routing the antenna cable into and through the vehicle interior,
avoiding sharp objects that can damage the cable. Keep the antenna cable away
from moving parts such as gas and brake pedals, trunk and door hinges, and
sliding seat brackets.
3J=-------------------------1IRl!JIII----....
Advertisement
Table of Contents
