HP ProLiant DL180 Maintenance And Service Manual page 50

slots
Figure 30 DIMM
•
Channel 1 -- DIMM1 and DIMM2
•
Channel 2 – DIMM3 and DIMM4
NOTE: Before installing the memory, remove the air baffle first, for detailed procedure, refer to the
'Processor' section in this chapter.
To remove memory module:
Completely open the holding clips securing the module.
1.
Gently pull the memory module upward to remove it from the slot.
2.
Removing a memory module
Figure 31
CAUTION: Place the memory module on a static-dissipating work surface or inside of an anti-static
bag.
Removal and Replacement Procedures 50