HP ProLiant DL180 Maintenance And Service Manual page 35

Removing the Optical Drive Carrier
Figure 7
To remove the bezel blank from the optical drive carrier:
Press in the four tabs (two on the top and two on the bottom) to release the bezel blank from the
1.
carrier.
Pull the bezel blank out of the carrier.
2.
CAUTION: Do not discard the bezel blank. If the optical drive is removed in the future, you must
reinstall the bezel blank to maintain proper system function.
Removing the Bezel Blank
Figure 8
To install the optical carrier with optical drive:
Align the optical drive in the carrier and install drive.
1.
Secure the optical drive to the carrier with the two mounting screws.
2.
Removal and Replacement Procedures 35