Download Print this page

Electrolux Icon E30SO75ESS General Installation Manual page 5

30" high-speed oven designer series
Hide thumbs Also See for Icon E30SO75ESS:

Advertisement

30" Combination Installation –
High-Speed Oven/Single Wall Oven
For detailed product dimensions
and installation specifications, refer
to model-specific product page and
installation guide on web
30" High-Speed
Oven Cutout
For models:
E30SO75FPS
E30SO75ESS
30" Electric Single
Wall Oven Cutout
For models:
E30EW75GPS
E30EW75GSS
* Minimum 2
clearance required
from bottom of
Built-In High-Speed
Oven cutout to top
edge of Wall Oven's
faceplate, leaving
a 2" visible gap
between both product
faceplates
** Critical dimension –
MUST be applied
30" Combination Installation Specifications
Always consult local and national electric codes.
(Refer to product-specific electrical specifications on this page.)
Minimum 24"deep cutout dimension is critical for proper combination
installation, to ensure that each built-in product's faceplate will fit
flush against cabinet front.
Bases must be level and cabinet front must be square.
Minimum 4-1/2" required distance from bottom of Wall Oven cutout
to floor, 31" suggested.
Respect critical dimensions as noted for proper installation of built-In
products.
Minimum 23-1/4" clearance needed for Wall Oven door depth
when open.
Electrolux Major Appliances, N.A.
10200 David Taylor Drive
Charlotte, NC 28262
USA
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
SO_EW INST 10/10
24" min.
11
21
/
"min.
16
22
3
/
"max.
16
22
22
7
2"
(visible
gap)*
28
28
1
/
"min.
2
29"max.
28
7
/
"max.
8
5
/
"
8
31"
suggested
distance
4
1
/
"
2
min.
required
1-877 -4electrolux (1-877 -435-3287)
1-800-265-8352
electroluxicon.ca
© 2010 Electrolux Home Products, Inc.
30"min.
20
1
/
"
4
16
3
/
"
4
3
/
" min.
8
/
" max.
8
C L
24" min.**
1
/
" min.
(critical
2
dimension)
2" min.
Bottom cutout
edge must be
finish cut
30" High-Speed Oven Specifications
Product Weight – (E30SO75FPS / E30SO75ESS) 115 Lbs.
Voltage Rating – 240V / 60 Hz / 15 or 20 Amps
Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only
electrical supply with ground required on separate circuit fused on
both sides of line.
Connected Load (kW Rating) @ 240 Volts = 3.3 kW
Amps @ 240 Volts = 13.2 Amps
Full oven base of solid plywood or similar material required, capable of
supporting 150 Lbs.
Minimum 2-5/8" clearance required from bottom of High-Speed Oven
cutout to top edge of Wall Oven's faceplate, leaving a 2" visible gap
between both product faceplates.
30" Electric Single Wall Oven Specifications
Product Weights – (E30EW75GPS) 178 Lbs. / (E30EW75GSS) 175 Lbs.
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit fused
on both sides of line.
Connected Load (kW Rating) @ 240 / 208 Volts = 4.0 / 3.0 kW
Amps @ 240 / 208 Volts = 16.6 / 14.4 Amps
Full oven base of solid plywood or similar material required, capable of
supporting 200 Lbs.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
electroluxicon.com
240V/60Hz
grounded electrical
outlet should NOT
be located within
shaded area
Full plywood base
required to support
150 lbs.
4"x 4" opening
to route armored
cable
Full base required
to support 200 lbs.
3" max.
Electrical junction
box location
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Printed in the U.S.A.

Advertisement

loading

This manual is also suitable for:

E30so75fps series