Pioneer DDJ-WEGO3 Operating Instructions Manual page 7

Dj controller

Hide thumbs Also See for DDJ-WEGO3:

Table of Contents

Enlarged version

Monitoring sound with headphones

1 Set the positions of the controls, etc., as shown below.

Names of controls, etc.

HEADPHONES VOL control

2 Press the [HEADPHONES SELECT A] button.

3 Turn the [HEADPHONES VOL] control.

Adjust the sound level output from the headphones to an appropriate

level.

Inputting the sound of the microphone

The sound of the microphone connected to the [MIC] terminal can be

mixed.

1 Connect the microphone to the [MIC] terminal.

2 Adjust the audio level input to the [MIC] terminal.

! Turn the [MIC VOL] control: The [MIC] terminal's input audio level is

adjusted.

! Only the volume of the microphone's sound can be adjusted.

! The sound of the microphone is not output from the headphones.

Quitting the system

1 Quit djay for Mac.

2 Press the [STANDBY/ON] button until the unit enters

standby.

3 Disconnect the USB cable from your computer.

Note

The software manual of djay for Mac can be downloaded from the

algoriddim website.

For details, see [Software Info] of [DDJ-WeGO3] on the Pioneer DJ

support site below.

http://pioneerdj.com/support/

Position

Turned fully counterclockwise

Table of Contents