About The Driver Software And Setting Utility Software - Pioneer DDJ-WEGO3 Operating Instructions Manual

Installation procedure (Windows)
1 Access the Pioneer DJ support site and click [Software
Info] under [DDJ-WeGO3].
2 Click [VirtualDJ Support Information] and then click
the link to the VirtualDJ LE 8 download page.
The VirtualDJ LE 8 download page appears.
3 On the displayed page, input the serial key printed on
this unit's bottom panel, then click [OK].
4 The download link of the installer is displayed; click
the installer for Windows to perform download.
5 Double-click the downloaded file.
The installer starts.
6 Follow the instructions on the displayed screens and
install the software.
1 Click [Next].
— To cancel the installation, click [Cancel].
2 Read the terms of the license agreement carefully, and if you agree, select
[I accept the terms in the License Agreement], then click [Next].
— If you do not agree to the contents of the license agreement,
click [Cancel] to cancel installation.
3 Select the type of installation for VirtualDJ LE 8, then click.
Normally select [Typical].
When [Typical] is selected, plug-ins and other components are
installed simultaneously.
4 Click [Install] to start the installation.
5 Click [Finish].
The installation is now complete.
Installation procedure (Mac OS X)
1 Access the Pioneer DJ support site and click [Software
Info] under [DDJ-WeGO3].
2 Click [VirtualDJ Support Information] and then click
the link to the VirtualDJ LE 8 download page.
The VirtualDJ LE 8 download page appears.
3 On the displayed page, input the serial key printed on
this unit's bottom panel, then click [OK].
4 The download link of the installer is displayed; click
the installer for Mac to perform download.
5 Double-click the downloaded file.
The installer starts.
6 Follow the instructions on the displayed screens and
install the software.
The installation is now complete.
About the driver software and
setting utility software
This unit functions as an audio device conforming to the ASIO standards.
Using the settings utility software
This function can only be used by those using a Windows operating
system.
 Launching the settings utility software
Click the Windows [Start] menu>[All Programs]>
[Pioneer]>[DDJ_WeGO3]>[DDJ_WeGO3 ASIO Settings
Utility].
! For Windows 8, click [DDJ_WeGO3 ASIO Settings Utility] from the
[Start] screen.
17
En