Led Status; Network Connection; Power Supply - Samsung SNH-E6411BN User Manual

power Supply

Plug-in the camera power adapter to the wall outlet and connect the camera as
shown.
Make sure to use the provided power adaptor. If you use an adaptor other than the
`
n
power supply adaptor provided in our package, the product may not operate properly.
It will take about 1min for the camera to boot-up completely.
`
When the camera has finished turning on, the LED lamp turns red and starts blinking.
`

network connection

Connect the provided network cable with the network terminal of the camera.
For further details on network configuration, refer to "network Connection and
Settings". (Page 11)

LeD status

LED indicator shows operational status with colors.
Refer to table below for detailed meaning of the LED indicator.
Color
Red
Booting up
Red Blinking
Booting completed / Establishing network connection
Blue Blinking
Connecting to the network.
Blue
Local connection established
Green
Connection to server completed / Normal operation
Yellow
WiFi Direct is operating.
Magenta
Updating firmware
01
Status
7