Chapter 4: Connecting The Wireless-G Ethernet Bridge For Setup; Figure 4-1: Connect To The Network - Linksys WET54GS5 User Manual

Wireless-G Ethernet Bridge with 5-Port Switch
Chapter 4: Connecting the Wireless-G Ethernet Bridge
for Setup
1. Attach the Bridge's antenna.
2. Plug the included Ethernet network cable into one of the five LAN ports on the back panel of the Bridge,
shown in Figure 4-1.
3. Plug the other end of the Ethernet network cable into the RJ-45 port of the hub, switch, or PC you wish to use
to configure the Bridge.

Chapter 4: Connecting the Wireless-G Ethernet Bridge for Setup

Figure 4-1: Connect to the Network

10