Download Print this page
Linksys Wireless-G Business Ethernet Bridge WET200 Product Data
Linksys Wireless-G Business Ethernet Bridge WET200 Product Data

Linksys Wireless-G Business Ethernet Bridge WET200 Product Data

Wireless-g business ethernet bridge
Hide thumbs Also See for Wireless-G Business Ethernet Bridge WET200:

Advertisement

Quick Links

High-Speed Wireless Bridging for Small
Businesses
The Linksys WET200 Wireless Bridge seamlessly bridges separate Ethernet networks
together wirelessly and is ideal for small businesses with offices and resources that
are in different office suites of a building or a closely adjacent building. The WET200
is a Power over Ethernet (PoE) end device so it can be installed anywhere an Ethernet
cable can be run if there is not ready access to a power outlet. PoE enables delivery
of both data and power to the WET200. An AC adapter is also included if the device
installation site has a power outlet nearby.
Advanced security features include Wi-Fi Protected Access™ (WPA2 Enterprise) with up
to 256-bit AES encryption using EAP (Extensible Authentication Protocol) giving small
businesses the protection they need to communicate and transfer data securely. The
integrated QoS features provide consistent voice and video quality on both the wired
and wireless networks, enabling the deployment of business qualilty VoIP and video
applications.
Additional support for VLANs, SNMP, Spanning Tree, and Port Mirroring make this an ideal
solution for network administrators to incorporate into larger organizations.
RangeBooster technology is a compatible add-on to standard Wireless-G that increases
wireless signal range up to two times and throughput by up to 35%. Unlike ordinary wireless
technologies that are hampered by signal reflections, RangeBooster devices use smart
antennas and embedded processors to detect and decode reflected signals to enhance and
boost data throughput. This capability also helps to reduce or eliminate "dead spots" within the
wireless coverage area as well.
.
5-port Wireless Bridge
Standards-based POE (IEEE
for securely connecting
802.3af ) or External DC
separate wired networks
power provides flexible
installation
Wireless-G Business
Ethernet Bridge
WET200
Model:
RangeBooster technology
Advanced wireless
for up to twice the range,
security using Wi-Fi
reduced dead spots,
Protected Access™ (WPA2
and up to 35% more
Enterprise) with up to
throughput than standard
256-bit AES encryption
802.11g
WET200
PRODUCT DATA
BUSINESS SERIES

Advertisement

loading

Summary of Contents for Linksys Wireless-G Business Ethernet Bridge WET200

  • Page 1 High-Speed Wireless Bridging for Small Businesses The Linksys WET200 Wireless Bridge seamlessly bridges separate Ethernet networks together wirelessly and is ideal for small businesses with offices and resources that are in different office suites of a building or a closely adjacent building. The WET200 is a Power over Ethernet (PoE) end device so it can be installed anywhere an Ethernet cable can be run if there is not ready access to a power outlet.
  • Page 2 Wireless-G Business Ethernet Bridge Features • 5 port 10/100 Base-T Specifications Ethernet Managed Switch, Autosensing half/full duplex Model & MDI/MDI-X Standards • Supports 802.11b and 802.11g wireless connection to Access Point Ports Buttons • Easy installation and Cabling Type configuration Web Interface LEDs •...
  • Page 3: Package Contents

    BUSINESS SERIES Check the product package and contents for specific features supported. Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2007 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.