The Administration Tab - Factory Defaults; Figure 5-23: Administration Tab - Factory Defaults - Linksys RT41P2-AT User Manual

Broadband router with 2 phone ports

Hide thumbs Also See for RT41P2-AT:

Table of Contents

Broadband Router with 2 Phone Ports

The Administration Tab - Factory Defaults

The Factory Defaults screen allows you to restore the Router's configuration to its factory default settings.

Factory Defaults

Restore Factory Defaults. To clear all of the Router's settings and reset them to its factory defaults, click the

Yes radio button.

After you have clicked the Yes radio button, click the Save Settings button to restore the Router to its factory

defaults, or click the Cancel Changes button to undo your change. For help information, click Help.

NOTE: Do not restore the factory defaults unless you are having difficulties with the Router and have

exhausted all other troubleshooting measures. Once the Router is reset, you will have to re-enter all

of your configuration settings. (However, if you have an active Internet phone service account, the

Router will automatically download its Internet phone service settings once it is connected to the

Internet again.)

Chapter 5: Configuring the Router

The Administration Tab - Factory Defaults

Table of Contents