The Administration Tab - Factory Defaults; The Administration Tab - Firmware Upgrade; Figure 5-38: Administration Tab - Factory Defaults; Figure 5-39: Administration Tab - Firmware Upgrade - Linksys WRT54GS User Manual

Wireless-G Broadband Router with SpeedBooster

The Administration Tab - Factory Defaults

Click the Yes button to reset all configuration settings to their default values, and then click the Save Settings
button. Any settings you have saved will be lost when the default settings are restored. This feature is disabled by
default.

The Administration Tab - Firmware Upgrade

Firmware can be upgraded by clicking the Upgrade button after browsing for the firmware, which you can
download from the Linksys website. Do not upgrade your firmware unless you are experiencing problems with
the Router. For more information about upgrading firmware, refer to "Appendix C: Upgrading Firmware".
Chapter 5: Configuring the Wireless-G Broadband Router
The Administration Tab - Factory Defaults
Downloaded from www.Manualslib.com manuals search engine

Figure 5-38: Administration Tab - Factory Defaults

Figure 5-39: Administration Tab - Firmware Upgrade

firmware: the programming code
that runs a networking device
download: to receive a file transmitted over a networ
upgrade: to replace existing software or
firmware with a newer version
35