Portwell AMDY-7002 User Manual
  1. Manuals
  2. Brands
  3. Portwell Manuals
  4. Motherboard
  5. AMDY-7002
  6. User manual

Portwell AMDY-7002 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AMDY-7002
Mini-ITX Board
User's Manual
Version 1.0
Copyright © Portwell, Inc., 2011 All rights reserved.
All other brand names are registered trademarks of their respective owners.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AMDY-7002 and is the answer not in the manual?

Questions and answers

Related Manuals for Portwell AMDY-7002

Summary of Contents for Portwell AMDY-7002

  • Page 1 AMDY-7002 Mini-ITX Board User's Manual Version 1.0 Copyright © Portwell, Inc., 2011 All rights reserved. All other brand names are registered trademarks of their respective owners.

  • Page 2: Table Of Contents

    Preface Table of Contents How to Use This Manual Chapter 1 System Overview.......................1-1 1.1 Introduction ....................... 1-1 1.2 Check List......................1-2 1.3 Products Specification ..................1-2 1.3.1 Mechanical Drawing................1-5 1.4 System Architecture..................1-7 Chapter 2 Hardware Configuration ...................2-1 2.1 Jumper Setting ....................2-1 Chapter 3 System Installation....................3-1 3.1 AMD G-Series FT1 Processors ................

  • Page 3: How To Use This Manual

    Portwell may make supplement or change in the products described in this document at any time. Updates to this manual, technical clarification, and answers to frequently asked questions will be shown on the following web site : http://www.portwell.com.tw/.

  • Page 4: Chapter 1 System Overview

    To meet expansion cards requirement, the AMDY-7002 series was designed one PCI Express x1 slot and one PCI slot. By these two slots, AMDY-7002 can support PCI Express x1 or PCI add-on cards such as ATI graphic card to meet multi-display function.

  • Page 5: Check List

    Adopt CF and CFast sockets as extra storage devices. AMDY-7002 series Mini-ITX embedded motherboards provide powerful graphic performance and low power consumption and I/O connections. Makes AMDY-7002 series the best solution for media, digital signage, gaming and POS applications. Check List...
  • Page 6 High Driving GPIO -Support 8 programmable high driving GPIO Cooling Fan -System FAN controlled by A55E System Monitoring Feature -Monitor CPU temperature, system temperature and major power sources, etc Outline Dimension -170 mm (L) x 170(W) mm AMDY-7002 User’s Manual...
  • Page 7 Realtek ALC-886 High Definition Audio System Software Ver: R2.49 CHIP Driver SATA HDD Seagate ST3500411SV 500GB SATA CDROM LITE-ON LH-20A1S DVD-ROM Power Supply FSP350-60GLC Operating Temperature -0 ~ 60℃ Storage Temperature -20 ~ 80℃ Operating Humidity -Operation Humidity: 5% ~ 95%, non-condensing AMDY-7002 User’s Manual...

  • Page 8: Mechanical Drawing

    System Overview 1.3.1 Mechanical Drawing AMDY-7002 User’s Manual...
  • Page 9 System Overview AMDY-7002 User’s Manual...

  • Page 10: System Architecture

    COM4 RS232/422/485 w/ Power COM1 RS232/RI# COM5 RS232/422/485 w/ Power COM2 RS232/RI# 8 Bit GPIO COM6 RS232/422/485 w/ Power COM7 RS232/w Power COM8 RS232/w Power 20 Pin ATX Rear IO Onboard Connectors Connectors Switch 5VSB AMDY-7002 System Block Diagram AMDY-7002 User’s Manual...

  • Page 11: Chapter 2 Hardware Configuration

    (★) Jumper Setting For users customize AMDY-7002’s features. In the following sections, Short means covering a jumper cap over jumper pins; Open or N/C (Not Connected) means removing a jumper cap from jumper pins. Users can refer to Figure 1 and Figure 2 for the Jumper allocations.
  • Page 12 Hardware Configuration RTL8111D Connector location on top layer AMDY-7002 User’s Manual...
  • Page 13 Hardware Configuration Connector location on bottom layer Jumper setting Reference Description LVDS0 panel VDD level selector 1-2: +3.3V 5-6: +5V(default) COM1 (J2 lower) connector pin 9 function selector 1-2: +5V power 3-4: +12V AMDY-7002 User’s Manual...
  • Page 14 5-6: Ring in (default) JP11 COM6 connector (J26) pin 8 function selector 1-2: +5V power 3-4: +12V 5-6: Ring in (default) JP12 COM3 connector (J31) pin 8 function selector 1-2: +5V power 3-4: +12V 5-6: Ring in (default) AMDY-7002 User’s Manual...
  • Page 15 Default Setting 0011 0010 G121SN01 V3 single channel 應為下圖 0011(defaul 1280x1024x24bit, G170EG01 dual channel 1920x1080x24bit, 0100 M240HW01 dual channel 0101~1111 Reserved Reserved Note: SW1: 0001 panels has not been validate yet. * Note 1: LVDS1 is an optional function. AMDY-7002 User’s Manual...
  • Page 16 PC Speaker connector SATA device power (for J27) USB port 10 COM3 COM4 USB port 6, 7 USB port 12, 13 USB port 8, 9 Front panel connector PCI-E slot CFAST socket CF socket GPIO Header VGA Connector AMDY-7002 User’s Manual...
  • Page 17 2 (Lime) Line Out 3 (Pink) Micro phone J4: PS2 + dual USB port Connector USB PIN No. Signal Description USB Power(5V) USB DATA- USB DATA+ USB GND PS2 PIN No. Signal Description MDAT KDAT Power MCLK KCLK AMDY-7002 User’s Manual...
  • Page 18 CHA TX1+ CHA TX2- CHA TX2+ CHA TX3- CHA TX3+ CHA CLK- CHA CLK+ DDC DATA DDC CLK CHB TX0- CHB TX0+ CHB TX1- CHB TX1+ CHB TX2- CHB TX2+ CHB TX3- CHB TX3+ CHB CLK- CHB CLK+ AMDY-7002 User’s Manual...
  • Page 19 PIN No. Function PIN No. Function -12V TRST# +12V PTMS PTDI PIRQA# PIRQB# PIRQC# PIRQD# +3.3VSB RESET# PCI 33MHz CLK PGNT# PCI REQ# PCI PME# AD31 AD30 AD29 +3.3V AD28 AD27 AD26 AD25 +3.3V AD24 C/BE3# IDSEL (AD21) AMDY-7002 User’s Manual...
  • Page 20 STOP# PLOCK# +3.3V PERR# SMB CLK +3.3V SMB DATA SERR# +3.3V C/BE1# AD15 AD14 +3.3V AD13 AD12 AD11 AD10 C/BE0# +3.3V +3.3V ACK64# REQ64# J15: CPU Fan, J24: System Fan PIN NO. DESCRIPTION Power Input Pulse AMDY-7002 User’s Manual 2-10...
  • Page 21 PCI-E RX+ +1.5V SMB CLK PCI-E TX- SMB DATA PCI-E TX+ USBD- USBD+ +3.3VSB +3.3VSB +1.5V +3.3VSB J17: ATX Power Connector PIN No. Function PIN No. Function +3.3V +3.3V -12V +3.3V PSON# POWER OK +5VSB +12V AMDY-7002 User’s Manual 2-11...
  • Page 22 Modem Ring In, depend on jumper setting of JP10, JP11, JP12, JP13. J28: PC Speaker Connector PIN No. Signal Description PC Speaker J29: SATA power Connector PIN NO. DESCRIPTION +12V J30: USB Port 10 Connector PIN No. Signal Description USBV USBD- USBD+ USBG AMDY-7002 User’s Manual 2-12...
  • Page 23 Reserved J37: PCI-Ex1 Connector PIN NO. Single Description PIN NO. Single Description +12V +12V +12V +12V +12V SMBUS CLK SMBUS DATA 3.3V +3.3V 3.3V standby +3.3V WAKE UP# PCIE_RST# PCIE_CLOCK+ PCIE_TX0+ PCIE_CLOCK- PCIE_TX0- PCIE_RX0+ PRESENT# PCIE_RX0- AMDY-7002 User’s Manual 2-13...
  • Page 24 PIN NO. DESCRIPTION Pull down DATA3 DATA11 DATA4 DATA12 DATA5 DATA13 DATA6 DATA14 DATA7 DATA15 CS#0 CS#1 Pull down IOR# IOW# Pull up +3.3V +3.3V Pull up RESET# IORDY DREQ DACK ACT# DATA0 Pull down DATA1 DATA8 AMDY-7002 User’s Manual 2-14...
  • Page 25 Signal Description *Note: This GPIO uses TTL level. GPIO base address is 4EE, default direction is output. J41: VGA connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION DESCRIPTION Reserved GREEN DDC DATA BLUE HSYNC VSYNC DDC CLK AMDY-7002 User’s Manual 2-15...

  • Page 26: Chapter 3 System Installation

    Timer (WDT) and operation of GPIO in software programming. AMD G-Series FT1 Processors The AMDY-7002 supports AMD G-Series FT1 (FCBGA-413) CPU. It provides very low TDP for different applications that need fan-less. It is using latest AMD G-Series Processor. Please see attached table for more detail.

  • Page 27: Installing The Single Board Computer

    3.3.1 Chipset Component Driver The chipset on AMDY-7002 is a new chipset that a few old operating systems might not be able to recognize. To overcome this compatibility issue, for Windows Operating Systems such as Windows XP /WIN7, please install its INF before any of other Drivers are installed.

  • Page 28: Audio Controller

    System Installation Please find Realtek RTL8111DL LAN driver in /Ethernet directory of AMDY-7002 CD-title. The drivers support Windows XP /7. LED Indicator (for LAN status) AMDY-7002 provides two LED indicators to report Realtek RTL8111DL Gigabit Ethernet interface status. Please refer to the table below as a quick reference guide.

  • Page 29: Wdt Function

    Set_Register(unsigned char offset, unsigned char value) { outportb(SIO_Port, offset); outportb(SIO_Port+1, value); printf("Write offset:%x = %x\n", offset, value); int main(void) { printf("test string\n"); Enter_IT872x_SIO(); Set_LDN(GPIO_LDN); Set_Register(0x72, 0xC0); Set_Register(0x73, 0x05); printf("System will reset in 5 seconds\n"); return 0; AMDY-7002 User’s Manual...

  • Page 30: Gpio

    System Installation GPIO The AMDY-7002 provides 8 programmable input or output ports that can be individually configured to perform a simple basic I/O function. Users can configure each individual port to become an input or output port by programming register bit of I/O Selection.
  • Page 31 { int result; printf("RUBY-D712 GPIO Test:\n"); //pin1 =11 //pin3 =12 //pin5 =47 //pin7 =50 //pin9 =74 //pin11=75 //pin13=76 //pin15=77 //pin2 =14 //pin4 =35 //pin6 =36 //pin8 =37 //pin10=70 //pin12=71 //pin14=72 //pin16=73 Enter_IT872x_SIO(); Set_LDN(GPIO_LDN); //Enable GPIO //Or_Register(0xC0,0x46) //11,12,14 AMDY-7002 User’s Manual...
  • Page 32 //47 outp(GPIO_Base+4,inp(GPIO_Base+4)&0xFE); //50 outp(GPIO_Base+6,inp(GPIO_Base+6)&0x0F); //74,75,76,77 result=1; if ((inp(GPIO_Base+0)&0x10)!=0x00) result=0; if ((inp(GPIO_Base+2)&0xE0)!=0x00) result=0; if ((inp(GPIO_Base+6)&0x0F)!=0x00) result=0; if (result==0){ printf("Test fail!!\n"); return 1; /////////////////////////////////////////////////// //Set Input And_Register(0xC8,0xF9); //11,12 And_Register(0xCB,0x7F); //47 And_Register(0xCC,0xFE); //50 And_Register(0xCE,0x0F); //74,75,76,77 //Set output Or_Register(0xC8,0x10); //14 AMDY-7002 User’s Manual...
  • Page 33 //output low outp(GPIO_Base+0,inp(GPIO_Base+0)&0xEF); //14 outp(GPIO_Base+2,inp(GPIO_Base+2)&0x1F); //35,36,37 outp(GPIO_Base+6,inp(GPIO_Base+6)&0xF0); //70,71,72,73 result=1; if ((inp(GPIO_Base+0)&0x06)!=0x00) result=0; //11,12 if ((inp(GPIO_Base+3)&0x80)!=0x00) result=0; //47 if ((inp(GPIO_Base+4)&0x01)!=0x00) result=0; //50 if ((inp(GPIO_Base+6)&0xF0)!=0x00) result=0; //74,75,76,77 if (result==0){ printf("Test fail!!\n"); return 1; //getchar (); printf("Test Pass!!\n"); return 1; AMDY-7002 User’s Manual...

  • Page 34: Chapter 4 Bios Setup Information

    Chapter 4 BIOS Setup Information AMDY-7002 is equipped with the Phoenix BIOS stored in Flash ROM. These BIOS has a built-in Setup program that allows users to modify the basic system configuration easily. This type of information is stored in CMOS RAM so that it is retained during power-off periods.

  • Page 35: Main Menu

    Use this menu for basic system configurations, such as time, date etc. System Date The date format is <Day>, <Month> <Date> <Year>. Use [＋] or [－] to configure system Date. System Time The time format is <Hour> <Minute> <Second>. Use [＋] or [－] to configure system Time. AMDY-7002 User’s Manual...
  • Page 36 BIOS Setup Information System information Display system information. Display system information. Boot Feature Select Boot features AMDY-7002 User’s Manual...
  • Page 37 BIOS Setup Information NumLock Select Power-on state for NumLock Error Manager Display Error Manager Log information. AMDY-7002 User’s Manual...
  • Page 38 BIOS Setup Information View Error Manager Log Display Error Manager Log information. Clear Error Manager Log Clear Error Manager Log. AMDY-7002 User’s Manual...

  • Page 39: Advanced

    BIOS Setup Information Advanced Use this menu to set up the items of special enhanced features. Select Language Select Language Boot Configuration Set Boot Configuration AMDY-7002 User’s Manual...
  • Page 40 Select priority of boot option between UEFI and Legacy. BIOS Level USB Enable/Disable all BIOS support for USB in order to reduce boot time. USB Legacy Support Enable/Disable USB BIOS SMM support for mouse, keyboard, mass storage, etc, in legacy operating systems such as DOS. AMDY-7002 User’s Manual...
  • Page 41 BIOS Setup Information SMBIOS Event Log SMBIOS Event Log. Event Log Enable/Disable Event Log. View SMBIOS event Log View SMBIOS event Log. Mark SMBIOS events as read Yes or No Clean SMBIOS events Clean SMBIOS events. AMDY-7002 User’s Manual...

  • Page 42: Amd

    BIOS Setup Information Use this menu to set up the items of special enhanced features. Platform Platform BIOS Specification. AMDY-7002 User’s Manual...
  • Page 43 Enable or disable the external Network Controller. External Network Boot ROM Enable or disable the external LAN Boot ROM. Display mode Display mode select. Universial Console Redirection Universial Console Redirection. Processor Options Processor Options Processor Core Control Processor Core Control AMDY-7002 User’s Manual 4-10...
  • Page 44 In Auto mode, check F3x1F0[19] SerialNumRdDis, if SerialNumRdDis is set to 1, HTC use AGESA setting. Otherwise check serial number in register F3x1F4 and F3x1F8. If there is no Serial Number in [D18F3x1F4] & [D18F3x1F4], disable HTC. Otherwise, CBS does nothing, use AGESA setting. TC Override TC Override. AMDY-7002 User’s Manual 4-11...
  • Page 45 BIOS Setup Information CPU Control CPU Control General Processor Control General Processor Control Target P-State Target P-State Auto、Highest、State 0 ~ State 7 AMDY-7002 User’s Manual 4-12...
  • Page 46 Select disable or enable USB1 HCs (Bus 0 Dev 18 Fn 0/2) USB Port 5 - 9 Select disable or enable USB2 HCs (Bus 0 Dev 19 Fn 0/2) USB Port 10 - 13 Select disable or enable USB3 HCs (Bus 0 Dev 22 Fn 0/2) AMDY-7002 User’s Manual 4-13...
  • Page 47 BIOS Setup Information SATA Device SATA Device. SATA Controller SATA Controller. SATA Mode SATA Mode. NATICE IDE、RAID、AHCI、LEGACY IDE ONCHIP IDE OPTION ONCHIP_IDE OPTION LEGACY IDE、NATIVE IDE GEC OPTION GEC OPTION AMDY-7002 User’s Manual 4-14...

  • Page 48: Others

    BIOS Setup Information GEC CONFIG OPTION GEC_CONFIG OPTION Others SIO Configuration Sio Configuration Serial Port 1 Disable、3F8/IRQ5、2F8/IRQ6 Serial Port 2 Disable、3F8/IRQ5、2F8/IRQ6 Serial Port 3 Disable、220/IRQ4、228/IRQ3、238/IRQ4、2E8/IRQ3、338/IRQ4、3E8/IRQ3 Serial Port 4 Disable、220/IRQ4、228/IRQ3、238/IRQ4、2E8/IRQ3、338/IRQ4、3E8/IRQ3 Serial Port 5 Disable、220/IRQ4、228/IRQ3、238/IRQ4、2E8/IRQ3、338/IRQ4、3E8/IRQ3 Serial Port 8 AMDY-7002 User’s Manual 4-15...
  • Page 49 BIOS Setup Information Disable、220/IRQ4、228/IRQ3、238/IRQ4、2E8/IRQ3、338/IRQ4、3E8/IRQ3 AMDY-7002 User’s Manual 4-16...
  • Page 50 BIOS Setup Information Watch Dog Timer Select Disable、15 secs、30 secs、1 min、2 mins、3 mins Power Control Former State、Always On、Always Off Hardware Monitor Hardware Monitor Wake on Lan and Ring Wake on Lan and Ring AMDY-7002 User’s Manual 4-17...
  • Page 51 BIOS Setup Information Option on Lan and ring Disable、Enable Wake PCIe Disable、Enable Power Management Power Management Configuration Resume by Alarm Disable、Enable AMDY-7002 User’s Manual 4-18...

  • Page 52: Security

    Press Enter to type Supervisor Hint String. Min. password length Set the minimum number of characters for password (1-20). HDD Password Select Supports user only or both user and master password. Ser HDD04 User Password Set HDD04 User Password. AMDY-7002 User’s Manual 4-19...

  • Page 53: Boot

    BIOS Setup Information Boot Boot Priority Order AMDY-7002 User’s Manual 4-20...

  • Page 54: Exit

    BIOS Setup Information Exit This menu allows you to load the BIOS default values or factory default settings into the BIOS and exit the BIOS setup utility with or without changes. AMDY-7002 User’s Manual 4-21...
  • Page 55 Load settings for optimized boot time and system performance. Discard Changes Load the original value of this boot time. Not the default Setup value. Save Changes Save all changes of all menus, but do not reset system AMDY-7002 User’s Manual 4-22...

  • Page 56: Chapter 5 Troubleshooting

    Chapter 5 Troubleshooting This chapter provides a few useful tips to quickly get AMDY-7002 running with success. As basic hardware installation has been addressed in Chapter 2, this chapter will primarily focus on system integration issues, in terms of BIOS setting, and OS diagnostics.
  • Page 57 Ports will support A55E ECH native Raid 0, 1,5,10 function on the 5 (Port [0:4]) ports. For SATA 3 Connector, please reference: B5048800 (GP).DIP Connector.SATA3-7 Red W/Lock Vertical.ABA-SAT-054-K07.LOTES For the SATA Port that dedicate for internal powered SATA device, please reference attached photo from AMDY-7000. AMDY-7002 User’s Manual...

  • Page 58: Bios Setting

    BIOS setting back to the initial factory configuration. It is recommended to do this so you can be sure the system is running with the BIOS setting that Portwell has highly endorsed. As a matter of fact, users can load the default BIOS setting any time when system appears to be unstable in boot up sequence.
  • Page 59 IRQ 15 Usable IRQ 【Unassigned】 It is then very easy to find out which IRQ resource is ready for additional peripherals. If IRQ resource is not enough, please disable some devices listed above to release further IRQ numbers. AMDY-7002 User’s Manual...

  • Page 60: Faq

    Please visit our technical web site at http://www.portwell.com.tw For additional technical information, which is not covered in this manual, you can mail to tsd@mail.portwell.com.tw or you can also send mail to our sales, they wull be very delighted to forward them to us. AMDY-7002 User’s Manual...

Table of Contents