Programmed Transmitter Notification; Valet Mode; Eliminating Lock / Unlock Notification Chirps - Code Alarm ca5554 Owner's Manual

Professional series deluxe vehicle remote start system with 900mhz 2 way confirming lcd remote control

Hide thumbs Also See for ca5554:

Table of Contents

Programmed Transmitter Notification

As a security precaution each time the vehicle's ignition is turn on the status LED

light with flash the number of transmitters programmed into the system. This helps

to identify unauthorized transmitters from accessing your vehicle. If you believe an

unauthorized transmitter has been programmed to your system, contact your installing

dealer for assistance.

Valet Mode is used to disable the system from remote starting. To

mode simply follow the 4 steps outlined below:

Turn the vehicle's ignition ON.

Push and hold the programming/valet button.

The LED will turn on solid when valet mode is active

Release the programming/valet button.

System lock and unlock notification chirps can be toggled ON or OFF without

entering the programming feature banks.

Turn the ignition ON then OFF.

Press and release the valet/programming button 3 times. The system

will respond with 1 chirp for ON or 2 chirps for OFF.

enter or exit valet

ca5554 Owners rev A

Table of Contents

Do you have a question about the ca5554 and is the answer not in the manual?