Edimax NS-2501 Quick Installation Manual page 7

Front Panel
NS-2501
1. Release button
The Release button has three functions: (1) unplug the external USB mass
storage, (2) shut down the storage server, and (3) reset the configuration of
the storage server to factory default settings.
Unplug the external USB mass storage: When you press and hold Release
button for 2 seconds, the storage server will beep for 0.5 second to hint that
your command is detected. At this time, you should release the Release
button immediately if you want to unplug the external USB mass storage
device plugged in USB1 port. The storage server will take several seconds to
unplug the USB mass storage. When the LED of the USB1 port goes off, you
can safely detach the USB mass storage device from this storage server.
Shut down the storage server: You should press and hold Release button for
more than 5 seconds to start shutting down the storage server. Please ignore
the beep sound. The Power LED will keep flashing during the shutting down
process. When the Power LED goes off, the storage server is completely shut
down. You can now switch off the power by switch the Power switch to "0".
Restore factory default settings: If you want to reset the configuration of the
storage server to factory default settings, you should press and hold BOTH the
Release button and the Copy button at the same time for more than 5 seconds,
the storage server will beep for 2 seconds to hint that your command is
accepted. The Power LED will keep flashing during the restore process. After
the restore is complete, the storage server will restart itself automatically.
4
1
2
3
NS-2502