Default Settings - Amped Wireless TAP-R2 User Manual

TAP-R2

DEFAULT SETTINGS

The default settings for your Router are listed here. If for some reason you need to return your Router back to
default settings, hold down the Reset button on the side panel for 10 seconds. The Router will reset back to
factory settings as listed below:
IP Address: 192.168.3.1
Web Menu Access:
2.4GHz Wireless SSID: Amped_TAPR2_2.4
Wireless Security Key (WPA/WPA2 Mixed Mode): wireless
5.0GHz Wireless SSID: Amped_TAPR2_5.0
Wireless Security Key (WPA/WPA2 Mixed Mode): wireless
USER'S GUIDE
http://setup.ampedwireless.com
113