TP-Link TL-WA701ND Installation Manual page 10

Hide thumbs Also See for TL-WA701ND:

T1. How do I restore my Access Point's configuration to its factory default settings?

With the Access Point powered on,

use a pin to press and hold the

RESET button on the rear panel for

8 to 10 seconds before releasing it.

Hold it in for 8 to 10 seconds

Once the Access Point is reset, the current configuration settings will be lost

Note

and you will need to reconfigure the Access Point.

T2. What can I do if I forget my password?

Restore the Access Point's configuration to its factory default settings. If you

don't know how to do that, please refer to previous section T1;

2) Use the default user name and password: admin, admin;

3) Try to reconfigure your AP by following the instructions of this QIG.

T3. What can I do if I cannot access the web-based configuration page?

Assign a static IP address 192.168.0.100 for your computer first before logging in the

management page. Here takes the procedures in Windows 7 for example.

Go to Start > Settings > Control

Panel, and then you will see the

following page.

Click View network

status and tasks

Table of Contents