Ip Filtering - BandLuxe R550 Series User Manual

address of the computers that are placed outside the firewall of your network.
In the text box, enter the last 3 digits of the DMZ host address (the prefix is
192.168.1 for this router), and then click
The host IP address will be added to the DMZ Host list, which can be further
disabled or enabled by clicking the 'Enable' checkbox. To remove this DMZ
Host, click

IP Filtering

IP Filtering
IP Filtering allows the Router to discard data from certain IP addresses.
To add a new IP filtering rule:
1. Name: Enter an application name for this IP filtering rule.
2. Protocol: Click
TCP+UDP (default), TCP, UDP, or Other...
3. Filter Source IP Address: Enter the source IP address to be filtered.
The text color will turn red with
entered (e.g.
valid, the text color changes back to black without
55
. After setting up the DMZ host, click
and select a protocol from the drop down list –
).
Using Web-based Management
.
on the right for any invalid IP address
). When the IP address entered becomes
.
on the right (e.g.