Section 3: Operation; Turning On; Keyboard; Key - Verity Systems CopyDisc AutoPrinter Platinum Operating And Maintenance Manual

SECTION 3: OPERATION

This chapter provides detailed operating instructions for your Verity Systems CopyDisc Platinum
printer. Your CopyDisc Platinum printer has many options and features designed to make it more
productive and easier to use. Please read through this chapter carefully so that you can take full
advantage of all the features of your system.

3.1 Turning On

When the Verity Systems CopyDisc Platinum printer is turned on it goes through a series of self-
tests and displays several messages.
Following are all the messages displayed during a normal power-up:
Initializing System
Check IDE Port
Check Printer
Check Autoloader
And Finally:
-HOME MENU-
>Start Job
Image Manager
Utilities
Setup
If this series of messages are displayed then your CopyDisc Platinum printer is ready for use. If
this series of messages are not displayed or different messages are displayed see the Error
Messages section (section 4) of this manual.

3.2 Keyboard

Following is the function of each key on the keyboard:
3.2.1 /\ Key (Up arrow)
If being prompted to enter a number or character this key increments the character at the
cursor to the next higher character or number. If a menu is being displayed this key moves
the cursor to the next menu selection up.
14
CopyDisc Duplicator Series
Fig. 1