Power On - Verity Systems CopyDisc AutoPrinter Platinum Operating And Maintenance Manual

2.3 Power On

Fit the printer to the CopyDisc Platinum robot. Please see the appropriate appendix the end of
this manual for full details on how to fit the relevant printer including fitting cartridges or
ribbons.
Attach the power cord to your CopyDisc Platinum printer, plug it into the mains.
•
Switch on the printer followed by the CopyDisc Platinum robot.
•
After the power is turned on, the Verity Systems CopyDisc Platinum printer goes through a
•
series of self-tests (see section 3.1 for full details).
As all CopyDisc Platinum printers are operating via a network, the CopyDisc needs to be
connected to the server PC running PublisherNET. Please refer to the DiscPilot Networking
manual for full details.
13
CopyDisc Duplicator Series