Chapter 5: Software Installation And Configuration For Windows 98Se, Me, And 2000 - Linksys WMP11 User Manual

3. The screen in Figure 4-9 will appear. Enter the WEP key of your wireless
network in the Network key field, and re-enter it in the Confirm network key
field. Click the Connect button.
Note: Windows XP does not support the use of a passphrase. Enter the
exact WEP key used by your access point.
To find the WEP
encryption key set-
tings of the other
wireless devices in
your network, such
as the WAP11
Wireless Access
Point, you may use
any device's web-
based utility to
check the WEP
encryption screen
for the correct key
entries. If you are
using other manu-
facturers' access
points, refer to their
documentation for
more information
about WEP encryp-
tion.
4. The screen in Figure 4-10 will
appear if your connection is
active.
For more information about WEP, refer to your access point's user guide, or
visit www.linksys.com.
For more information about wireless networking on a Windows XP computer,
click Start and then Help and Support. Enter the keyword wireless in the
field provided, and press the Enter key.
Congratulations! The installation of the Wireless-B PCI Adapter is
10
Instant Wireless
Figure 4-9
Figure 4-10
complete.
Series Wireless-B PCI Adapter
®
Chapter 5: Software Installation
and Configuration for Windows
98SE, Me, and 2000
The Wireless-B PCI Adapter Setup Wizard will guide you through the installa-
tion procedure for Windows 98SE, Me, and 2000. The Setup Wizard will install
the WLAN Monitor and Device Driver, as well as configure the Adapter.
Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 5-1 should appear. If it does not,
click the Start button and choose Run. In the field that appears, enter
D:\setup.exe (where "D" is the letter of your CD-ROM drive).
Important for Windows 98SE, Me, and 2000 users: You must run
the Setup Wizard to install the software before installing the hardware.
Figure 5-1
11