Dual-Band Wireless A+G PCI Adapter
Chapter 6: Using the Wireless Network Monitor
Use the Wireless Network Monitor to check the link information, search for available wireless networks, or create
profiles that hold different configuration settings.
Accessing the Wireless Network Monitor
After installing the Adapter, the Wireless Network Monitor icon will appear in the system tray of your computer. If
the Wireless Network Monitor is enabled, then the icon will be green. If the Wireless Network Monitor is disabled
or the Adapter is not connected, then the icon will be gray.
If you right-click the icon, you will see these choices:
• About - Click About to view the version information for the driver and Wireless Network Monitor.
• Use Windows XP Wireless Configuration (Windows XP only) - If your computer is running Windows XP, then
this choice will be available. If you want to use Windows XP Wireless Zero Configuration to control the
Adapter—instead of using the Wireless Network Monitor—then select Use Windows XP Wireless
Configuration.
If you want to switch back to the Wireless Network Monitor, right-click the Wireless Network Monitor icon,
and select Use Linksys Wireless Network Monitor.
NOTE: For more information about Wireless Zero Configuration, refer
to Windows Help.
• Turn Monitor on - Select Turn Monitor on to enable the Wireless Network Monitor.
• Turn Monitor off - Select Turn Monitor off to disable the Wireless Network Monitor.
Besides selecting Turn Monitor on when you right-click the icon, you can also double-click the Wireless
Network Monitor icon to activate the Wireless Network Monitor.
Chapter 6: Using the Wireless Network Monitor
Accessing the Wireless Network Monitor
Figure 6-1: Wireless Network Monitor Icon
Figure 6-2: Windows XP - Use Windows XP
Wireless Configuration
Figure 6-3: Windows XP - Use Linksys
Wireless Network Monitor
18